filling machine

manufacturers recently asked me, how to maintain the filling machine? today I'm going to explain this issue in detail for you, there are many types of filling machine, automatic filling machine, automatic filling machine, paste filling machine, cosmetics filling machine and so on count. Although there are many types of filling machines, the methods and methods of maintenance are similar. Next, let's learn how to maintain the filling machine.

First of all, before the filling machine, bottle brushing machine and bottle punching machine are used,

1. install and then debug. read the instructions carefully and prepare the tools used before debugging.

2. After the installation, bottle brushing machine and bottle washing machine are installed, adjust the filling track and bottle receiving plate to be horizontal, the liquid storage barrel is full of materials, and all electrical switches are in the closed position.

3. Insert the filled container into the tooling box and connect the external power supply. The power socket must be a three-pin socket with a reliable grounding wire to prevent the cabinet from leaking electricity and hitting people. Turn the power switch of the machine to ON and the power indicator will be on.

4. The loading rack support plate holds up the filling rack, and moves the positioning sleeve on the filling head upward with fingers. The positioning sleeve shall be able to move up and down flexibly, and the filling needle therein shall be exposed or retracted without obstruction.

5. Turn the switch under the liquid storage barrel to the open position so that the materials can flow into the total metering pump. According to the total filling volume of each container, adjust the screw on the crank, turn the knob of the filling speed control board to about 20 degrees, and then turn the switch on the filling speed control board to the open position.

6. When the liquid flowing out of the filling head is the set amount, tighten the liquid amount adjustment nut, cover the filling head shell, and loosen the filling frame support plate.

should pay attention to the maintenance of the filling machine after it is used. During maintenance, the piston should be disassembled and washed and the fixing screws should be removed at the same time, so as not to affect the technological requirements of the other when the first one is disassembled. Before cleaning the piston filling machine, the remaining product should be removed, and then filled with soft cleaning fluid in the barrel. The cylinder has been lubricated when leaving the factory. Please do not open or add any lubricating oil to ensure that the surface of the filling machine is clean and hygienic, and power off when not working. In addition, while adhering to the maintenance and correct use of the filling machine, it is necessary to conduct regular testing and debugging. Only in this way can the filling machine work healthily and stably.

, with the continuous improvement of living standards, people's demand for beverages and daily chemical products is increasing, and the continuous development of enterprises, the use of beverage filling machines, bottle brushing machines and bottle punching machines is also increasing. The problems that should be paid attention to in the use of filling machines are becoming increasingly acute. Therefore, in order to better production of enterprises, it is very necessary to maintain them.

, through the above study, everyone has a comprehensive study of the maintenance methods and methods of the filling machine. If you have any questions or encounter problems in maintenance, you can contact us or directly upgrade and improve the filling machine equipment. Because some of the old mechanical maintenance is not significant, so the replacement of new equipment is more cost-effective.